Porsche 911 GT3 with Touring Package celebrates its world premiere in Frankfurt

By admin in Porsche 0 Comment
Porsche 911 GT3 with Touring Package celebrates its world premiere in Frankfurt

Porsche 911 GT3 with Touring Package celebrates its world premiere in Frankfurt

The 911 GT3 with Touring Package will be unveiled at the 67th International Motor Show (IAA), which will take place from September 12 to 24, 2017, in Frankfurt. Instead of the fixed rear wing, when equipped with the optional Touring Package, the GT3 will have an adaptive rear spoiler similar to that of the 911 Carrera models. Beneath its understated exterior is pure motorsport-derived technology: The four-liter naturally aspirated flat-six engine develops 500 horsepower and generates 339 lb.-ft. of torque. The 911 GT3 with Touring Package sprints from 0 to 60 miles per hour in 3.8 seconds and reaches a top track speed of 196 miles per hour. The Touring Package will be available exclusively in combination with the six-speed manual transmission.

The name “Touring Package” harkens back to a variant of the 911 Carrera RS from 1973. The very pure 911 design and classic interior features were key elements of this model. The new 911 GT3 when equipped with the Touring Package follows the same concept, and retains the two-seater arrangement of the 911 GT3. Apart from certain Alcantara®-covered interior fittings, almost all 911 GT3 options are also available in combination with the Touring Package. This includes all available exterior colors, wheel choices, the Porsche Ceramic Composite Brake (PCCB) system, the front axle lift system, LED headlights, three seat options, and the Sport Chrono Package.

A high-performance sports car in every aspect

With the exception of the rear spoiler treatment, the body of the GT3 with the optional Touring Package remains unchanged. Like the other GT3 models, it is based upon the body of the 911 Carrera 4 model, which is 1.7 inches (44 millimeters) wider at the rear wheel arches. It sits about one inch (25 millimeters) lower than the 911 Carrera S. It also has large air intakes in the specially designed front fascia, as well as the air intake that is typical of the 911 GT3 model, located in front of the luggage compartment lid. In contrast to the other GT3 models, the front turn signal lenses and the taillights are not tinted. The 911 GT3 with Touring Package sits on forged center lock alloy wheels. At the front, 245/35 ZR 20 tires are fitted on nine-inch wide wheels, while at the rear 305/30 ZR 20 tires are mounted on twelve-inch wide wheels.

Sporty aerodynamics: Rear spoiler with additional gurney flap

The subtle differences in the Porsche GT3 model when it is equipped with the Touring Package are primarily visible at the rear. The automatically extending rear spoiler from the 911 Carrera models is equipped with an aerodynamic lip (“Gurney Flap”) finished in body color. The specially designed rear decklid grille bears a new “GT3 touring” logo. Other distinguishing features include side window surrounds, Sport Exhaust tailpipes, and headlight washer system covers which are finished in silver, as well as the Porsche logo at the rear. With the further available “Touring Package – Exterior in Black” option, these elements are finished in black, as on other 911 GT3 models. In this case, the front turn signal lenses and the taillights are tinted.

Leather interior

The interior creates the feel of a classic sports car with a manual transmission. In line with the character of a GT car, leather is prevalent rather than Alcantara®, which is used in other GT3 models. The steering wheel rim with twelve o’clock marker, shift lever, door panel armrests, center console storage compartment lid and interior door handles are upholstered in smooth-finish leather. The seat centers are made of black fabric. The headrests feature embossed Porsche crests and all seams in the partial leather interior are sewn in black thread. The finishing touch to the interior is black brushed aluminum trim.

Powerful six-cylinder naturally aspirated engine from Porsche’s motorsport heritage

The powertrain and chassis are identical on all 911 GT3 vehicles with manual transmission, including models equipped with the Touring Package. The naturally aspirated four-liter flat-six engine is taken from the 911 RSR and 911 GT3 Cup race cars. It is the most powerful naturally aspirated flat-six direct-injection engine that Porsche has ever developed for a street-legal car. The engine is characterized by its high-revving nature. The crankshaft spins at up to 9,000 revolutions per minute, which is truly extraordinary, even for a sports car engine.

The gear ratios of the six gears are precisely tuned to the power delivery and torque curve of the engine and offer particularly sporty shifting characteristics. An automatic rev-match feature delivers an exciting sound on downshifts. This function is activated via the “Sport” button on the center console, which enables a faster synchronization of the gears. The GT Sport manual transmission transfers the power to a mechanical rear differential lock with brake-based torque vectoring (PTV).

Fast in the corners, secure on the straights: Rigid chassis with rear-axle steering

The chassis of the 911 GT3 is a testament to Porsche’s experience in motorsport. In addition to the basic layout, the chassis also boasts superior handling characteristics, thanks predominantly to the standard active rear-axle steering. Depending upon the vehicle’s speed, it steers either in the opposite or the same direction as the front wheels, thereby improving the vehicle’s agility or stability. The size of the tires on both axles promote strong braking, sharp turn-in, and excellent traction.

Porsche Track Precision app as standard

In addition to Porsche Communication Management (PCM), including an online navigation module with real-time traffic information, every 911 GT3 model includes as standard equipment the Connect Plus module and the Porsche Track Precision app. This app enables the driver to display, record, and analyze detailed driving data on their smartphone.

Pricing and availability

The Touring Package option is now available to order and is expected to reach U.S. dealers in early 2018. Like other 911 GT3 models, the version with Touring Package costs $143,600, excluding any available options and the $1,050 delivery, processing, and handling fee.

courtesy: press.porsche.com

Porsche unveils the most powerful street-legal 911 model of all time

By admin in Porsche 0 Comment
Porsche unveils the most powerful street-legal 911 model of all time

Porsche unveils the most powerful street-legal 911 model of all time

The fastest and most powerful street-legal 911 model ever is ready for launch: The new 2018 Porsche 911 GT2 RS is celebrating its official world premiere at the Goodwood Festival of Speed in the UK from June 30th to July 2nd. At the heart of this high-performance sports car is a 700-horsepower twin-turbo flat-six engine. Weighing in at 3,241 pounds with a full tank of fuel, the lightweight two-seater accelerates from zero to 60 miles per hour in 2.7 seconds. The new 911 GT2 RS can reach a top track speed of 211 miles per hour, and it surpasses the 2011 911 GT2 RS by 80 horsepower. The 2018 911 GT2 RS delivers 553 lb.-ft. of torque, an increase of 37 lb.-ft. compared to the previous 911 GT2 RS.

The 3.8-liter engine in the GT2 RS is based on the power plant found in the current 911 Turbo S model. In order to increase performance further, larger turbochargers push an increased volume of air into the combustion chambers. A new additional cooling system delivers optimum cooling at peak loads by spraying water on the intercoolers when the intake air temperature reaches a determined threshold. This reduces the inlet temperature under boost and allows for optimum power output, even under extreme conditions. The customized GT seven-speed double-clutch Porsche Doppelkupplung (PDK) transmission in the new GT2 RS enables maximum efficiency with uninterrupted torque transfer. The specially developed lightweight titanium exhaust system weighs around 15 pounds less than the system used in the 911 Turbo and delivers a particularly emotional sound.

Porsche Design is celebrating the debut of this very special high-performance sports car by releasing a special-issue watch. Offering a nod to the world of motorsport, the Porsche Design 911 GT2 RS watch is exclusively available to owners of the new vehicle and can only be ordered in conjunction with the new GT model.

Race-bred chassis for exceptional cornering

The 2018 911 GT2 RS has exceptional dry grip thanks to its race-bred chassis with rear axle steering and Ultra High Performance (UHP) tires. The stability management system is tuned for spirited driving in the new 911 GT2 RS. The PSM can be deactivated in two stages using the ESC OFF and ESC+TC OFF functions. Large air intakes and outlets and the striking rear wing underscore the emphasis on aerodynamics and down-force. The large, wide wheels with 265/35 ZR 20 tires at the front and 325/30 ZR 21 tires at the rear help ensure outstanding braking and cornering potential. The 911 GT2 RS features Porsche Ceramic Composite Brakes (PCCB) as standard. The front fenders, wheel housing vents, outer shells on the Sport Design exterior mirrors, air intakes on the rear quarter panels, and parts of the rear are made from carbon fiber reinforced plastic (CFRP), as are many of the interior components. The front luggage compartment lid is also made from carbon fiber to make the vehicle as light as possible, while the standard roof panel is made from magnesium. Both of these body panels feature a visible recess in the center, a design element previously used on the 2016 911 GT3 RS.

Optional Weissach package saves 40 pounds of weight

The optional Weissach package reduces weight by nearly 40 pounds, further enhancing the vehicle dynamics of the 911 GT2 RS. The package includes magnesium wheels and numerous elements made of carbon fiber. For instance, with this optional package, the roof and anti-roll bars are made of carbon fiber, as are the end links on both axles. The 911 GT2 RS forged magnesium wheels reduce both overall and unsprung weight by over 25 pounds, complementing the vehicle’s handling characteristics. When equipped with the Weissach Package, the carbon fiber weave of the luggage compartment lid and the roof are left largely exposed, and are painted with a centrally placed decorative strip in the vehicle color for a distinctive look. The Weissach package is optionally available with an MSRP of $31,000.

A truly sporty interior

The interior of the 911 GT2 RS is dominated by red Alcantara®, black leather, and carbon fiber trim pieces as standard. The GT2 RS Sport steering wheel with shift paddles is also included as standard. Drivers and passengers can experience the driving dynamics of the high-performance sports car in Full Bucket Seats with carbon fiber reinforced backrests, which offer a high level of comfort and lateral support. As in every 911 model, Porsche Communication Management (PCM) serves as the central control unit for audio, navigation, and communication. Porsche Connect Plus and the Porsche Track Precision app are also included as standard, enabling detailed recording, display, and analysis of driving data on a smartphone.

The optional Chrono Package expands the PCM functions to include a performance display, which can be used to display, save, and evaluate lap times. The package also includes a stopwatch on the dashboard featuring an analog and digital display. The Chrono Package on the 911 GT2 RS also provides preparation for the lap trigger available from Porsche Tequipment. When using the Porsche Track Precision app in conjunction with the infrared transmitter placed at the side of the track, the lap trigger receiver enables drivers to record lap times with a higher level of precision.

Exclusive watch for owners: Porsche Design 911 GT2 RS Chronograph

Porsche Design has teamed up with Porsche Motorsport to develop the 911 GT2 RS Chronograph exclusively for 911 GT2 RS owners. The timepiece housing is made of lightweight titanium. At its heart is the first clock movement developed by Porsche Design, the product of three years’ work. The caliber 01.200 includes a flyback function, a load-path-optimized movement bridge, and an official COSC certificate of authenticity.

The flyback function is inspired by motorsport and represents a special feature of the Porsche Design GT2 RS watch. On a traditional chronograph, the buttons must be pressed three times in order to measure consecutive time intervals: The first press stops the chronograph, the second resets it, and the third restarts the measuring process. On chronographs with a flyback function, these processes happen automatically and in rapid succession. The stop function and the ongoing time display are clearly separated using yellow markings. Many of the details on the timepiece are based on the design details of the GT2 RS. The tungsten winding rotor is modeled after the rims of the 911 GT2 RS. The clock face is made of carbon fiber, while the design of the time display matches the instrument cluster and the tachometer. The 911 GT2 RS and its watch counterpart are exclusively available at authorized Porsche dealers worldwide. The vehicle and watch are produced and customized in line with each customer’s wishes and are delivered together.

Pricing and availability

The 2018 Porsche 911 GT2 RS model is available to order with a base MSRP of $293,200, excluding the $1,050 delivery, processing and handling fee. It will reach U.S. dealers in early 2018.

courtesy: press.porsche.com

Sportec Porsche 911 Turbo SPR1

By admin in Porsche 0 Comment

Porsche 911Turbo

Porsche 911Turbo

The standard Porsche 911 Turbo’s 480HP 3.6-liter bi-turbocharged flat six is by no means a slouch, but where there’s power, there’s always space for even more power. Or at least that’s what Porsche tuning specialist Sportec believes. The Swiss based tuner revealed a new version of its 911 Turbo based SPR1 that lifts the 3.6-liter flat six’s output to a staggering 858 horsepower at 8,200 rpm and 642 lb-ft of peak torque at 4,800 rpm. Power is transferred to all four wheels through a six-speed manual gearbox.
Weighing in at 1,345kg or 2,965 lbs, the power-to-weight ratio is 637 horsepower per ton. According to Sportec, the SPR1 takes a mere 3.0 seconds to hit 62mph (100km/h,) with 186mph (300km/h) coming in just 18.9 seconds. The Swiss firm said that the supercar has recorded a top speed in excess of 236mph or 380km/h at Nardo, Italy.

Other highlights of the SPR1 include titanium connecting rods, a flat carbon fiber under floor, active suspension and F1 style ceramic brake discs plus composite (carbon / Kevlar) body panels, 20-inch forged alloy wheels, an integrated safety cage and a leather / alcantara interior.